Cubic Yards to Short Tons Calculator
This calculator converts cubic yards to US short tons by multiplying by a density that you enter. It does not assign a material or claim a universal density. Density can change with composition, temperature, moisture, compaction, and measurement method, so use a value that applies to the same material condition as the measured volume.
Method
The units cancel dimensionally: yd³ × short tons/yd³ = short tons. The result panel also reports related units: pounds = short tons × 2,000; metric tonnes = short tons × 0.90718474.
Example
With 10 yd³ and an entered density of 1.4 short tons/yd³:
The starting density is only an editable example. It is not evidence that any named material has that density.
Limits
- Enter only nonnegative volume and a density greater than zero.
- Keep the density unit exactly as labeled; another density unit must be converted first.
- The calculation estimates only the material mass. Packaging, containers, retained liquid, and other loads are separate.
- For purchasing, transport, structural, or safety decisions, use measured or specification data and the required safety margins.
For the underlying relationship, see the density calculator. For volume-only changes, use the volume converter. If your volume is measured in cubic feet instead of cubic yards, the cubic feet to pounds calculator applies the same density-times-volume approach with an entered lb/ft³ density.
Sources
-
NIST, Guide for the Use of the International System of Units (SP 811) — unit symbols, SI usage, and accepted conversion-factor guidance.
-
NIST, SI Units: Mass — mass-unit terminology.
-
NIST, Handbook 44 Appendix C: General Tables of Units of Measurement — Handbook 44 Appendix C defines the avoirdupois short ton as 2,000 pounds, the mass unit the calculator converts toward.