Cubic Feet to Pounds Calculator
This calculator converts cubic feet to pounds by multiplying by a density that you enter. It does not assign a material or claim a universal density. Density can change with composition, temperature, moisture, compaction, and measurement method, so use a value that applies to the same material condition as the measured volume.
Method
The units cancel dimensionally: ft³ × lb/ft³ = lb. The result panel also reports related units: US short tons = pounds ÷ 2,000; kilograms = pounds × 0.45359237.
Example
With 10 ft³ and an entered density of 62.43 lb/ft³:
The starting density is only an editable example. It is not evidence that any named material has that density.
Limits
- Enter only nonnegative volume and a density greater than zero.
- Keep the density unit exactly as labeled; another density unit must be converted first.
- The calculation estimates only the material mass. Packaging, containers, retained liquid, and other loads are separate.
- For purchasing, transport, structural, or safety decisions, use measured or specification data and the required safety margins.
For the underlying relationship, see the density calculator. For volume-only changes, use the volume converter.
Sources
-
NIST, Guide for the Use of the International System of Units (SP 811) — unit symbols, SI usage, and accepted conversion-factor guidance.
-
NIST, SI Units: Mass — mass-unit terminology.
-
NIST, Handbook 44 Appendix C: General Tables of Units of Measurement — Handbook 44 Appendix C states the short ton as 2,000 pounds, backing the short-ton result row.